First, you need to know what circle cutting is, it is a tool that enables you to cut the circle of any size including 3 inches to 20 inches in diameter. The circle cutting kits are available as basic kit and deluxe kit. The circle cutting guide kits comprises different tools as per the kits functioning. People consider the plasma-cutting machine for their circle cutting purpose. Through this system, you can easily cut any surface and you can also use the default template and cut the metal and non-metallic surface as per your requirement. Through this cutting edge, you can also piercing the metals and you can also shape your metal as an oval and complete circle.
The tool carry case comprises 2 metal wheels, torch cap holder, adjustable axels, 4 suction cups (non-metallic material) magnetic base, holder, a center pin, 11 inches arm. This kit enables you to cut the perfect circle. The unique twin bar configuration enables the circle cutting with precision. It rotates the frame in one continuous action. Inside and outside cutting is done with the help of guide frame, as it enable the guide parts to move.
Tips to Cut Circle with the Deluxe Kit by Using Magnetic Base and Suction Cup:
The suction cups and magnetic base is mainly used to cut the circles more than 8 inches that is 20.3 cm in diameter. You need to maintain the pressure and the diameter of the circle. If you use below 8 inches or else the heat of the torch will damage the suction cups as well as magnets.
At first, you need to make a punch mark the point from where the circle is centered.
After this, you need to insert the pivot pin straight in the center hole, where the magnet base is placed.
Then, you have to place the tip of the pivot pin in the punch mark.
It incorporates the bearing, which enables the head to rotate.
Do not use the wheels to make small circle cuts.
Cutting too fast will give a blow back of dross or cutting too slow may start to splutter.
In order to make the large circle cuts thread the hex bar into the unspotted hole.
Well, in order to get the precision in the work. Move it smoothly in the direction of the work. The speed of the cutting is important, as too fast or too slow will determine the quality of the cut. In order to have a multiple cut, you can use template. There are adjustable tools that enable multiple cutting and design. But if you use any template then place the template in a proper order before you initiate the cutting. Else your template can get damaged due to pressure.
Safety Measures for Circle Cutting:
However, always follow the safety measure before using these kits and tools, as it is necessary to follow safety rules while using these kits. It can be risky at times.
Be careful and wear gloves while using it. It will protect your hands from any mishap.
Always wear non-flammable cloths while using this tool.
Eye protection is a must in case you are using circle cutting tool. Hence, flip front plasma goggle will keep your eyes safe.
Reading the instruction manual before using the kit will help you and guide in a better way to use the machine.
Hence, as it has become easy to use the tools and machines, you can select the best company and premium quality tool that enables you to work easily without any problem. You can cut the metals easily with the help of tools.
Comments