The electronic fuel injection or the EFI connection is one of the major concerns when your vehicle roars and moves like a beast. There are many benefits of replacing the traditional carburetor with the EFI. However, one needs to calibrate the engine and tune it up to get the best effects of using the EFI. Some of the expert engine mechanics can do the job correctly to get the best benefits of using them. However, before installing them, one should know some necessary acts and the benefits therein to get the best results.
The Working Principle
The traditional carburetor is the place where the fluid dynamics control the fuel and mix it with the airflow to give the smooth movement of the pistons. However, they are not perfect, as the valves are either sliding or rotating and the flowing air is mechanically adjusted. In the EFI connection system, there is no carburetor, the airflow mechanism is based on rotating, and the butterfly valve and the fuel injector are controlled electronically. In this type of connection, the amount of fuel or the air is not dependent on each other, and they may vary according to the inputs given by various sensors attached to the engine system.
The Benefits
Let’s have a look at some of the benefits you can enjoy while using this system:
Less Fuel Consumption-With EFI connection system in place, the fuel consumption is lowered extensively, as the ratio of fuel to air is continuously monitored by the system getting the instant inputs from the sensors. They are perfect for optimizing the use of fuel without compromising the efficiency of the engine. One can reduce fuel consumption by nearly 30% in comparison to traditional carburetors. Altitude compensation is also possible with installing these types of connections.
Use Of Heavy Fuel Is Possible -While small engines give trouble using heavy fuels in traditional carburetors, having this connection enables the use of these types of fuels in the smaller capacity engine too. Gone are the days when heavy fuels could not be used in smaller cars. The electronic fuel injection system has revolutionized the idea.
Gives More Power-If your engine has an EFI connection, then you are sure to get more power, torque and speed of your vehicle without coughing and heating up. The ignition time is also reduced, and it always works to compensate for the other factors and balances them to give enough power to roar on the road. An engine fitted with this connection can provide around 10% more power than the traditional carbureted engines, and all the speed bugs desire that the most.
Increases The Reliability-Random stoppage of the engine, oils in the spark plug due to pumping the gas, icing problems and other such issues are eliminated using the EFI system, as the air and fuel ratio is optimized continuously to balance all the factors, thereby increasing the reliability of the engine.
Enhances The Starting System- The EFI connection system has the provision for cold as well as a hot starting system. As the connection optimizes the ratio of the fuel and air, and atomization of the mixture is done efficiently after the injection of the fuel, the starting system is enhanced to a great extent. Even the two-stroke engine that has difficulty starting system smoothly roars with the turn of the ignition key using these types of connections. As a result, the engine can be started in any operating conditions with ease.
Conclusion
Gone are the days when you frequently needed to crank the engine for a start or burn a hole in your pocket as the engine used to consume much fuel. With the introduction of EFI connection to the engine, the driving blues are over and speed is now fun.
Comentários